How To Restore Hal Dll From The Windows Xp Cd

Get the set for the errorHAL.dll is missing or corrupt on Windows XP, Windows Vista and Windows 7.

Contents

• 1 About "HAL.dll is missing or corrupt"
  • ane.one Description and Symptoms
  • 1.2 Symptom 1: "HAL is missing, or decadent" error screen on startup
• ii Causes of this Error
  • 2.i Crusade 1: Invalid Boot.INI file configuration
  • ii.2 Crusade two: BCD configuration is incorrect
  • 2.3 Cause three: The hal.dll file is in fact corrupted or missing
  • 2.4 Crusade 4: File system integrity compromised
• 3 Fixing "Hal.dll is missing or decadent" on Windows
  • 3.ane Fix #one: Rebuild boot.ini or BCD with Piece of cake Recovery Essentials
  • 3.ii Ready #2: Manually try rebuild of boot.ini
  • 3.three Fix #iii: Replace hal.dll
  • iii.4 Fix #iv: Use Startup Repair to attempt HAL replacement
  • 3.five Set #5: Repair corrupted organisation files with the SFC command
  • 3.6 Fix #6: Check the difficult drive with CHKDSK utility
• 4 More than Information
  • 4.i Linked Entries
  • four.2 Support Links
  • 4.3 Applicable Systems

About "HAL.dll is missing or decadent"

The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

Description and Symptoms

The error letters, alerts, warnings, and symptoms below are tied to this error.

Symptom i: "HAL is missing, or corrupt" error screen on startup

The HAL(Hardware Abstraction Layer) serves as an interface between a system's hardware and software, providing a consistent hardware platform on which to run applications. When a HAL is employed, applications practise non access hardware straight only access the abstract layer provided by the HAL. For example, responding to an interrupt is quite unlike on a machine with an Avant-garde Programmable Interrupt Controller (APIC) than on ane without. The HAL provides a single function for this purpose that works with all kinds of interrupts by various chipsets, and so that other components need non be concerned with the differences. In Windows, HAL is implemented in hal.dll, and when this file is either missing on corrupt, the boot process halts, and a error screen is displayed.

Here is an case of "HAL is missing or corrupt" fault screen for Windows XP:

Windows could non kickoff considering the post-obit file is missing or corrupt: <Windows root>\system32\hal.dll. Delight re-install a copy of the above file.

And here is an case of "HAL is missing or decadent" error screen for Windows Vista and Windows 7:

Windows Boot Manager  Windows failed to beginning. A recent hardware or software change might be the  cause. To ready the problem:     1. Insert your Windows installation disc and restart your figurer.    2. Choose your language settings, and so click "Next."    3. Click "Repair your reckoner."  If y'all practise not have this disc, contact your arrangement administrator or calculator  manufacturer for assistance       File: \Windows\system32\hal.dll      Condition: 0xc0000221      Info: Windows failed to load because the HAL is missing, or corrupt.

The "Status" 0x lawmaking and the "Info" text may differ, but the file in question is always \Windows\system32\hal.dll

Causes of this Error

This error has been known to occur as a result of ane of the following causes:

Crusade 1: Invalid Kicking.INI file configuration

On Windows XP and other operating systems using the NTLDR bootloader, the boot.ini file configuration could be either changed or become incorrect. This consequently means the ARC paths in the[operating systems] section or thedefault entry in BOOT.INI are incorrect. This can happen if kicking.ini is modified (inadvertently or maliciously), if the BIOS settings take changed, or if hardware (especially IDE, SATA, or SCSI disk drives) accept been added or removed.

Cause 2: BCD configuration is incorrect

Invalid data in BOOTMGR's kick configuration data file (BCD) can cause this error to exist nowadays on Windows Vista and Windows 7. Hal.dll is required for the Windows kernel to communicate with the underlying hardware in a platform-agnostic way. Incorrect data in the BCD will cause BOOTMGR to load Windows with the wrong organization root set, and hal.dll volition not be found. This will cause the "HAL is missing or corrupt" error to appear.

Crusade iii: The hal.dll file is in fact corrupted or missing

Failed Windows Updates or Automatic Updates to Windows that involve an upgrade of critical system files (especially service pack installations) that update hal.dll may result in this error. If hal.dll is non written to the disk correctly, or an incompatible version of hal.dll is used, and then "HAL is missing or decadent" error may appear.

Crusade 4: File system integrity compromised

The hard drive's file system may become damaged because of deejay write errors, ability outages or virus attacks. If that'south the case, the operating system cannot detect hal.dll to boot properly and the loading process is halted.

Fixing "Hal.dll is missing or corrupt" on Windows

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did non come with a Windows installation disc or if you no longer have your Windows setup media, y'all tin can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and tin as well be used to solve this problem with the directions below.

Fix #ane: Rebuild kicking.ini or BCD with Easy Recovery Essentials

Easy Recovery Essentials' ane-click automated organization repair corrects issues acquired by missing or misconfigured kick.ini and BCD by recreating them from scratch on the active bootable partition for Windows. This is done automatically as part of the automated repair process, and requires no manual action or user intervention.

Easy Recovery Essentials is guaranteed to fix the "Hal.dll is missing or decadent" error automatically using its congenital-in Automated Repair pick. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

1. Download Like shooting fish in a barrel Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7 or eight) before you lot download EasyRE. This guide can assist you identify what version of Windows you accept installed.
2. Fire the prototype. Follow these instructions on how to burn the bootable ISO epitome very advisedly, as making a bootable CD tin can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
3. Boot upwardly your PC from the Easy Recovery Essentials CD or USB you created.
4. Once EasyRE is running, choose the "Automatic Repair" selection and click Go on.

   

   Choose "Automatic Repair" in Like shooting fish in a barrel Recovery Essentials

5. After EasyRE scans your computer'south drives, identify and select the drive letter for your Windows installation from the list, and so click on the Automated Repair button to brainstorm.

   

   Choose the drive associated with the Windows installation you're trying to repair.

6. Easy Recovery Essentials will start analyzing the selected drive for issues. EasyRE will test for and attempt to automatically correct errors with the disk, sectionalization, bootsector, filesystem, bootloader, and registry. No intervention is required, equally EasyRE'southward repair is fully automated:

   

   Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

7. Once the process is consummate, EasyRE will written report its findings. Click on the Restart push to reboot your PC and exam the changes.
8. The "Hal.dll is missing or corrupt" error should now be fixed as your PC begins to load:

   

   Windows, booting upward successfully.

You can download Easy Recovery Essentials from here.

Fix #2: Manually effort rebuild of kick.ini

A boot.ini file is used by Windows to configure and display its operating organisation options. Instructions on manually recreating the boot.ini file are also available, but require a moderate level of reckoner expertise. The instructions below will guide yous on recreating boot.ini automatically from the Windows XP setup CD.

Unable to boot into the Windows setup CD?
Run into our guide on setting up a PC to boot from the CD or DVD for troubleshooting and more than detailed instructions.

1. Insert your Windows XP CD and restart your reckoner.
2. Printing a primal to boot into the CD when yous see the "Press any key to kick from CD" message.
3. When you arrive at the "Welcome to Setup" message, pressR to start the Recovery Console.
4. Type in your Administrator password; hitEnter
5. The adjacent control you need to write is below; hittingEnter afterwards:

   bootcfg /rebuild

The above command,bootcfg /rebuild, will scan your reckoner for installed Windows copies. If yous have Windows XP, here are the adjacent steps:

1. PressY if the control prompt shows a message like to the one below:

   Total Identified Windows Installs: 1  [ane] C:\Windows Add installation to boot listing? (Yes/No/All)

2. When you receive a bulletin similar this:

   Enter Load Identifier

   You are being asked to provide a proper noun to exist assigned and shown in the boot menu for the installation yous picked in the previous step. Examples:

   Enter Load Identifier: Windows XP Professional (Recovered)

3. (Optional) When you receive a bulletin like this:

   Enter OS Load options

   Type in/fastdetect followed pastEnter

4. Restart your calculator.

Here is an case of what the PC's console output should look like once the kicking.ini file is properly restored:

Fixing Kicking.ini file

Fix #3: Replace hal.dll

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer accept your Windows setup media, you can apply Like shooting fish in a barrel Recovery Essentials for Windows instead. EasyRE volition automatically find and fix many problems, and can also be used to solve this trouble with the directions below.

If hal.dll is in fact missing or corrupt, yous tin restore the original hal.dll file back from your Windows XP installation disc.

Unable to boot into the Windows setup CD?
See our guide on setting up a PC to kick from the CD or DVD for troubleshooting and more detailed instructions.

1. Insert your XP CD into the reckoner.
2. Restart your reckoner.
3. Press whatsoever key to kick into the CD when y'all come across the "Press any key to boot from CD" bulletin.
4. PressR to startRecovery Panel when the Options screen appears.
5. Type in your Administrator password followed by theEnter key to submit information technology.
6. You'll reach the Command Prompt now, type the post-obit command, whereD:\ is your CD's bulldoze alphabetic character andC:\ is the alphabetic character of the drive you installed Windows to:

   expand D:\i386\hal.dl_ C:\Windows\system32\

7. PrintingY when you are asked if yous want to overwrite this file and and then hitEnter to submit the command.
8. Restart your figurer.

Here is an example of what the PC's console output should look like once the hal.dll file is properly restored:

Replacing the hal.dll file

Set #four: Utilise Startup Repair to attempt HAL replacement

On Windows Vista and Windows 7, Startup Repair can be used to scan the organization for damaged or missing system files to supplant the hal.dll file if information technology is decadent or missing.

Windows Setup CD/DVD Required!
Some of the solutions beneath require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer accept your Windows setup media, you tin use Piece of cake Recovery Essentials for Windows instead. EasyRE will automatically discover and ready many issues, and can also be used to solve this problem with the directions below.

Startup Repair is an automated diagnosis and repair tool that is available from the Windows setup disc and can be used to discover and repair some common problems. More information about how Startup Repair operates and what information technology does can be found in our knowledgebase. The following steps will initiate Startup Repair from the Windows setup disc:

Unable to boot into the Windows setup CD?
Run into our guide on setting upward a PC to kicking from the CD or DVD for troubleshooting and more detailed instructions.

1. Insert your Windows installation DVD into your PC'due south CD-ROM drive,
2. Fully power down your PC, and make sure it has fully close off,
3. Power up your PC,
4. Printing whatsoever central when you encounter "Printing whatsoever key to boot from CD or DVD.."
5. Click the link titled "Repair your calculator" in the bottom-lefthand corner, after commencement selecting your language and keyboard options.
   
6. Wait for Startup Repair to browse your PC for Windows installations, and so select your install from the listing it shows:
   
7. Cull "Startup Repair" from the list of available recovery options to begin:
   
8. Startup Repair volition brainstorm scanning your installation for known issues and will attempt a repair, if possible.
   

Hither is an instance of what the PC'due south startup repair should look like once the hal.dll file is properly restored:

Hal.dll restored by Windows vii Startup Repair

Fix #five: Repair corrupted organization files with the SFC command

On Windows Vista and Windows 7, it is possible to utilise the built-in Windows SFC(system file checker) tool to automatically scan a figurer's system files and repair them if necessary.

Here are the steps to run SFC:

1. Boot from your Windows install disc
2. Click on Repair your co mputer after selecting proper linguistic communication, time and keyboard input.
3. Select the Windows installation drive, which is usually C:\, and click Next
4. Choose Command Prompt when the System Recovery Options box appears
5. Write the following command and press Enter later:

   sfc /scannow /offbootdir=D:\ /offwindir=D:\Windows\

   Supervene upon D: with the letter of the alphabet of the driver where Windows is installed, and D:\Windows with the Windows binder location.

Here is an example of what the PC's panel output should look similar one time the sfc.exe scan is complete and missing files are successfully restored:

Hal.dll restored by the SFC utility

Fix #vi: Check the hard drive with CHKDSK utility

If the hard drive has its file integrity compromised, it is possible to employ built-in Windows CHKDSK utility to scan the disk and set up the file system errors.

Here are the steps to run CHKDSK:

1. Kick from your Windows install disc
2. Click on Repair your co mputer later on selecting proper linguistic communication, fourth dimension and keyboard input.
3. Select the Windows installation bulldoze, which is usually C:\, and click Side by side
4. Choose Control Prompt when the System Recovery Options box appears
5. Write the following command and press Enter afterwards:

   chkdsk C: /f

   Supervene upon C: with the alphabetic character of the driver where Windows is installed.

Here is an case of what the PC's console output should expect like once the chkdsk.exe is complete:

Chkdsk utility results screen

More than Information

Linked Entries

• bootcfg

Back up Links

• Easy Recovery Essentials for Windows – our repair and recovery deejay.

  It's an easy-to-utilise and automated diagnostics disk. It's available for Windows eight, Windows 7 and Windows Vista. It's also bachelor for Windows XP and Windows Server.

  Read more at Windows Recovery Disks.

• The NeoSmart Support Forums, member-to-fellow member technical support and troubleshooting.
• Become a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows seven.

Applicative Systems

This Windows-related knowledgebase commodity applies to the following operating systems:

• Windows XP (all editions)
• Windows Vista (all editions)
• Windows 7 (all editions)

Propose an edit

Source: https://neosmart.net/wiki/hal-dll-missing-corrupt/

Posted by: barnestheregoth.blogspot.com

Share this post